Warning: implode(): Invalid arguments passed in /www/wwwroot/jobquiz.info/mdiscuss.php on line 336
A solid circular shaft transmits a torque of 80 Nm.If the allowable shear stress of the material is 150 MPa,assuming a factor of safety of 2,the minimum allowable design diameter in mm is: ?->(Show Answer!)
Question Set

1. A solid circular shaft transmits a torque of 80 Nm.If the allowable shear stress of the material is 150 MPa,assuming a factor of safety of 2,the minimum allowable design diameter in mm is:





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->Describe a material that transmits light without diffusion or scattering....
QA->A circular disc of copper has a symmetrical hole at its center. The disc is uniformly heated. The diameter of the hole will?....
QA->The number of spherical bullets that can be made out of a solid cube of lead whose edge measures 44 cm, if the diameter of each bullet be 4 cm, is—....
QA->A​ ​white​ ​solid’A’on​ ​heating​ ​gives​ ​off​ ​a​ ​gas​ ​which​ ​turns​ ​lime​ ​water milky.The​ residue​ ​is​ ​yellow​ ​when​ ​hot​ ​but​ ​turns​ ​white​ ​on​ ​cooling​ ​.The solid​ ​A​ ​is:....
QA->Photoelectric effect can be explained by assuming that light?....
MCQ->A solid circular shaft transmits a torque of 80 Nm.If the allowable shear stress of the material is 150 MPa,assuming a factor of safety of 2,the minimum allowable design diameter in mm is:....
MCQ->The maximum shear stress in a solid shaft of circular cross-section having diameter d subjected to a torque T is τ. If the torque is increased by four times and the diameter of the shaft is increased by two times, the maximum shear stress in the shaft will be....
MCQ->A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum shear stress will be....
MCQ->A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The minimum normal stress will be....
MCQ->A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution