A. Ax = 0, Ay = 150 lb, Az = 562 lb, TBC = 300 lb, TBD = 212 lbB. Ax = 0, Ay = 150 lb, Az = 456 lb, TBC = 150 lb, TBD = 212 lbC. Ax = 0, Ay = 267 lb, Az = 843 lb, TBC = 533 lb, TBD = lbD. Ax = 0, Ay = 150 lb, Az = 500 lb, TBC = 212 lb, TBD = 212 lb Answer: Option A Explanation: No answer description available for this question. Let us discuss. Workspace Report errors ... Name : Email:....

QA->What happens; When water is heated from °C to 10°C the volume of water?....

QA->The pH of water at 25°C is When it is heated to 100°C; then what will be the pH of water?....

QA->What happens, When water is heated from °C to 10°C the volume of water?....

QA->The pH of water at 25°C is When it is heated to 100°C, then what will be the pH of water?....

QA->When water is heated from 0o Celsius to 100o Celsius, the volume of water?....

MCQ->Latent heat absorbed by 1 lb of water at 212°F, when it is changed to steam at 212°F, may be around __________ BTU.....

MCQ->Sensible heat absorbed by 1 lb of water when it is heated from 32 to 212°F may be around __________ BTU.....

MCQ->Determine the tension in the supporting cables BC and BD and the components of reaction at the ball-and-socket joint A of the boom. The boom supports a drum having a weight of 200 lb. at F. Points C and D lie in the x—y plane.

MCQ->1000 Kg of liquid at 30°C in a well stirred vessel has to be heated to 120°C, using immersed coils carrying condensing steam at 150°C. The area of the steam coils is 1.2 m2 and the overall heat transfer co-efficient to the liquid is 1500 W/m2.°C. Assuming negligible heat loss to the surrounding and specific heat capacity of the liquid to be 4 kJ/kg.°C, the time taken for the liquid to reach desired temperature will be....

MCQ->The simplest method of welding two pieces of metal together is known as pressure welding.The ends of a metal are heated to a white heat-for iron,the welding temperature should be about 1300C-in a flame.At this temperature the metal becomes plastic.The ends are pressed or hammered together,and the joint is smoothed off.Care must be taken to ensure that surfaces are thoroughly clean first,for dirt will weaken the weld.Moreover,the heating of iron or steel to a high temperature cause oxidation,and a film of oxide is added to the heated surfaces.For this reason,flux is applied to the heated metal.At welding heat,flux melts and the oxide particles are dissolved in it together with any other impurities which may be present.The metal surfaces are pressed together,and the flux is squeezed out from the center of the weld.A number of different types of weld may be used,but for fairly thick bars of metals,a vee-shaped belt should be normally employed.It is rather stronger than ordinary butt weld. The simplest way of welding two pieces of metal together is....