1. Drying of a wet solid under constant drying conditions means the exposure of the wet solid to the air of constant





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->If + means × , - means † , × means - and † means + then 16 – 4 + 3 × 5 ÷ 2 =....
QA->In a certain code 743 means Mangoes are good; 657 means Eat good food; and 934 means Mangoes are ripe. Which digit means ripe in that language?....
QA->If ‘+’ means ‘×’, ‘__‘ means ‘+’, ‘×’ means ‘÷’ and ‘÷’ means ‘__‘ then find the value of; 6 – 9 + 8 × 3 ÷ 20 = ……. .....
QA->If + means , x means -, means + and - means x. Find 168x6-2+12?....
QA->If P means / , T means +, M means -, and D means x, then what will be the value of the expression 12M12D28P7T15?....
MCQ->Drying of a wet solid under constant drying conditions means the exposure of the wet solid to the air of constant....
MCQ->200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 x 10-3 kg/m2.s. The initial moisture content of the solid is 0.2 kg moisture/kg dry solid. The interfacial area available for drying is 4 m2/1000 kg of dry solid. The moisture content at the end of the drying period is (in kg moisture/kg dry solid)....
MCQ->A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls/ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids))....
MCQ->A 25 cm x 25 cm x 1 cm flat sheet weighing 1.2 kg initially was dried from both sides under constant drying rate conditions. It took 1500 seconds for the weight of the sheet to reduce to 1.05 kg. Another 1m x 1m x 1cm flat sheet of the same material is to be dried from one side only.Under the same constant drying rate conditions, the time required for drying (in seconds) from its initial weight of 19.2 kg to 17.6 kg is....
MCQ->It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%).....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution