1. Which three statements are true about the operation of a full-duplex Ethernet network? There are no collisions in full-duplex mode. A dedicated switch port is required for each full-duplex node. Ethernet hub ports are preconfigured for full-duplex mode. In a full-duplex environment, the host network card must check for the availability of the network media before transmitting. The host network card and the switch port must be capable of operating in full-duplex mode.





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

  • By: guest on 02 Jun 2017 01.56 am
    Full-duplex means you are using both wire pairs simultaneously to send and receive data. You must have a dedicated switch port for each node, which means you will not have collisions. Both the host network card and the switch port must be capable and set to work in full-duplex mode.
Show Similar Question And Answers
QA->Sound travels with a different speed in media. In what order does the velocity of sound increase in these media?....
QA->Name the Delhi High Court judge who revoked former UPA minister P Chidambaram's anticipatory bails in INX Media case by ED and CBI 48 hours before his retirement and who has been appointed as the new Chairperson of PMLA Appellate Tribunal?....
QA->With which sports item is the foul card of red and black card is associated?....
QA->Which is the only Indian port to be listed amongst the world's top 30 container ports as per the latest Lloyds Report?....
QA->Which to card in Hockey is similar to yellow card in the foot-ball?....
MCQ->Which three statements are true about the operation of a full-duplex Ethernet network? There are no collisions in full-duplex mode. A dedicated switch port is required for each full-duplex node. Ethernet hub ports are preconfigured for full-duplex mode. In a full-duplex environment, the host network card must check for the availability of the network media before transmitting. The host network card and the switch port must be capable of operating in full-duplex mode.....
MCQ->Which of the following are unique characteristics of half-duplex Ethernet when compared to full-duplex Ethernet? Half-duplex Ethernet operates in a shared collision domain. Half-duplex Ethernet operates in a private collision domain. Half-duplex Ethernet has higher effective throughput. Half-duplex Ethernet has lower effective throughput.....
MCQ->Which of the following types of connections can use full duplex? Hub to hub Switch to switch Host to host Switch to hub Switch to host....
MCQ->What will be the output of the program in 16-bit platform (under DOS)? #include<stdio.h> int main() { struct node { int data; struct node link; }; struct node p, q; p = (struct node ) malloc(sizeof(struct node)); q = (struct node ) malloc(sizeof(struct node)); printf("%d, %d\n", sizeof(p), sizeof(q)); return 0; }....
MCQ->You are installing a network interface card on a computer with the following configuration: a 5867133 CPU, 16MB or RAM, a 800-MB IDE hard disk, a parallel port configured as LPT1, and a serial port configured as COM1, which is currently used by a mouse. In addition to the IDE host adapter and the video card, the following devices have been installed on the computer's expansion bus: a modem on COM2, a SCSI host adapter for a CD-ROM drive, and a sound card. The SCSI hose adapter is using IRQ 5, and the sound card is using IRQ 11. The network interface card that you are installing supports the following choices for IRQ: 2, 3, 4, 5, 9,10 and 11. Which IRQ(s) could you use for the network interface card without creating an IRQ conflict with another device?....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions