The flux commonly used for brazing: ?->(Show Answer!)

Question Set

1. The flux commonly used for brazing:

Show Similar Question And Answers

QA->Flux reacts with the impurities to form fusible material. which is known as which name?....

QA->The unit of magnetic flux density?....

QA->Unit of magnetic flux?....

QA->Two types of flux are:?....

QA->The product obtained when gangue is added with flux?....

MCQ->Commonly used flux for brazing is....

MCQ->The flux commonly used in brazing is....

MCQ->The flux commonly used for brazing:....

MCQ->The simplest method of welding two pieces of metal together is known as pressure welding.The ends of a metal are heated to a white heat-for iron,the welding temperature should be about 1300C-in a flame.At this temperature the metal becomes plastic.The ends are pressed or hammered together,and the joint is smoothed off.Care must be taken to ensure that surfaces are thoroughly clean first,for dirt will weaken the weld.Moreover,the heating of iron or steel to a high temperature cause oxidation,and a film of oxide is added to the heated surfaces.For this reason,flux is applied to the heated metal.At welding heat,flux melts and the oxide particles are dissolved in it together with any other impurities which may be present.The metal surfaces are pressed together,and the flux is squeezed out from the center of the weld.A number of different types of weld may be used,but for fairly thick bars of metals,a vee-shaped belt should be normally employed.It is rather stronger than ordinary butt weld. The simplest way of welding two pieces of metal together is....

MCQ->Pick out thể one word for - a secret arrangement....

Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions Question ANSWER With Solution