Question Set

1. When hardening steel by the carburising process,after the steel has been heated to the correct temperature and for the correct amount of time,furnace is shut off and the steel is:





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->The inventor of the Steel Furnace is?....
QA->A pendulum clock is set to give correct time at the sea level. This clock is moved to a hill station at an altitude of 2500m above the sea level. In order to keep correct time on the hill station, the length of the pendulum?....
QA->Which element is used in medicine; photography and making dyes; gives off a violet vapour when heated?....
QA->During melting process the beat given to a body is utilised an open pan and allowed to evaporate. After somtims the temperature of water?....
QA->Which nation has broken off all diplomatic ties with the United States after its President Donald Trump recognised Opposition leader Juan Guaido as the South American country's interim President?....
MCQ->When hardening steel by the carburising process,after the steel has been heated to the correct temperature and for the correct amount of time,furnace is shut off and the steel is:....
MCQ->The simplest method of welding two pieces of metal together is known as pressure welding.The ends of a metal are heated to a white heat-for iron,the welding temperature should be about 1300C-in a flame.At this temperature the metal becomes plastic.The ends are pressed or hammered together,and the joint is smoothed off.Care must be taken to ensure that surfaces are thoroughly clean first,for dirt will weaken the weld.Moreover,the heating of iron or steel to a high temperature cause oxidation,and a film of oxide is added to the heated surfaces.For this reason,flux is applied to the heated metal.At welding heat,flux melts and the oxide particles are dissolved in it together with any other impurities which may be present.The metal surfaces are pressed together,and the flux is squeezed out from the center of the weld.A number of different types of weld may be used,but for fairly thick bars of metals,a vee-shaped belt should be normally employed.It is rather stronger than ordinary butt weld. The simplest way of welding two pieces of metal together is....
MCQ->The only suitable method for hardening the low carbon steel is case hardening. Which of the following is a case hardening process?....
MCQ->Consider the following statements If ensemble and time averages of a random process are identical, the process is ergodic.If ensemble and time average of a random process are not identical, the process is ergodic.An ergodic process is stationary.A stationary process is necessarily ergodic. Which of the above statements are correct?....
MCQ->S1: I usually sleep quite well in the train, but this time I slept only a little. P : Most people wanted it shut and I wanted it open. Q : As usual, I got angry about the window. R : The quarrel left me completely upset. S : There were too many people too much huge luggage all around. S6: It was shut all night, as usual The Proper sequence should be:....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution