1. The formation of oxide film on a metal due to atmospheric exposure reduces its





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->The process of assembling and imposing of film for exposure is called....
QA->Exposure to which heavy metal causes acrodynia or pink disease in children?....
QA->The film that has been screened at more international film festivals than any other Who was the director of the malayalam film – Mathilukal?....
QA->Which film has won the first Kerala State film award for the best film?....
QA->Which is the first Malayalam film to win the National Film Award for Best feature film?....
MCQ->The formation of oxide film on a metal due to atmospheric exposure reduces its....
MCQ->The simplest method of welding two pieces of metal together is known as pressure welding.The ends of a metal are heated to a white heat-for iron,the welding temperature should be about 1300C-in a flame.At this temperature the metal becomes plastic.The ends are pressed or hammered together,and the joint is smoothed off.Care must be taken to ensure that surfaces are thoroughly clean first,for dirt will weaken the weld.Moreover,the heating of iron or steel to a high temperature cause oxidation,and a film of oxide is added to the heated surfaces.For this reason,flux is applied to the heated metal.At welding heat,flux melts and the oxide particles are dissolved in it together with any other impurities which may be present.The metal surfaces are pressed together,and the flux is squeezed out from the center of the weld.A number of different types of weld may be used,but for fairly thick bars of metals,a vee-shaped belt should be normally employed.It is rather stronger than ordinary butt weld. The simplest way of welding two pieces of metal together is....
MCQ->Statements: All film stars are playback singers. All film directors are film stars. Conclusions: All film directors are playback singers. Some film stars are film directors.

....
MCQ->The various stages of formation of snow are listed below : 1. Formation of ice crystals 2. Formation of snow pallets 3. Formation of snow flakes 4. Formationof snow crystals 5. Formation of rimed crystals Which one of the following sequences is correct ?....
MCQ->A metal oxide is reduced by heating it in a stream of hydrogen. After complete reduction, it is found that 3.15 gm of the oxide has yielded 1.05 gm of the metal. It may be inferred that the....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution