Question Set

1. Machine moulding of dry mixture of refractories requires a pressure of the order of __________ kg/cm2.





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->In a mixture of 35 litres, the ratio of milk and water is 5 : Another 5 litres of milk is added to the mixture. The ratio of milk and water in the new mixture is—....
QA->PET is not used in extrusion blow moulding because....
QA->What is the order of magnitude of electric resistance of the human body (dry)?....
QA->What is the order of magnitude of electric resistance of the human body (dry) ?....
QA->Which winds are flowing from sub tropical high pressure to sub polar low pressure?....
MCQ->Machine moulding of dry mixture of refractories requires a pressure of the order of __________ kg/cm2.....
MCQ->A gas mixture contains 6 moles of H2 and 2 moles of N2. If the total pressure of the gaseous mixture is 4 kgf/cm2 ; then the partial pressure of N2 in the mixture will be __________ kgf/cm2 .....
MCQ->In a laboratory test run, the rate of drying was found to be 0.5 x 10-3 kg/m2.s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m2/kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is....
MCQ->A jar contains a mixture of milk and water in the respective ratio of 3:1. When 4 litre of the mixture is taken out and thereafter 3 litre of milk is added to the remaining mixture. The respective ratio of milk and water in the resultant mixture thus formed is 4:1. What was the initial quantity of water in the mixture....
MCQ->ABC is rigid bar. It is hinged at A and suspended at B and C by two wires BD and CE made of copper and steel respectively, as shown in the given figure. The bar carries load of 1t at F, mid-way between B and C. Given Ac = 4 cm2, A = 2 cm2, Ec = 1 x 106 kg/cm2, Es = 2 x 106 kg/cm2. Ps is the force in the steel wire and Pc is the force in the copper wire, the ratio Pc/Ps will be

....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution