Question Set

1. If the iron ore contains clay as an impurity, the flux added during calcination, is





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->The impurity present in the ore?....
QA->The product obtained when gangue is added with flux?....
QA->During the process of electrolytic refining of copper some metals present as impurity settle as anode mud these are?....
QA->The method of concentrating the ore which makes use of the difference in density between ore and impurities is called?....
QA->What do you mean by calcination?....
MCQ->If the iron ore contains clay as an impurity, the flux added during calcination, is....
MCQ->The simplest method of welding two pieces of metal together is known as pressure welding.The ends of a metal are heated to a white heat-for iron,the welding temperature should be about 1300C-in a flame.At this temperature the metal becomes plastic.The ends are pressed or hammered together,and the joint is smoothed off.Care must be taken to ensure that surfaces are thoroughly clean first,for dirt will weaken the weld.Moreover,the heating of iron or steel to a high temperature cause oxidation,and a film of oxide is added to the heated surfaces.For this reason,flux is applied to the heated metal.At welding heat,flux melts and the oxide particles are dissolved in it together with any other impurities which may be present.The metal surfaces are pressed together,and the flux is squeezed out from the center of the weld.A number of different types of weld may be used,but for fairly thick bars of metals,a vee-shaped belt should be normally employed.It is rather stronger than ordinary butt weld. The simplest way of welding two pieces of metal together is....
MCQ->In the extraction of iron from its Haematite ore, the flux added aid gangue formed respectively are....
MCQ->__________ is used as a flux in the extraction of iron from iron ore (hametite) in blast furnace.....
MCQ->A butane isomerisation process produces 70 kmole/hr of pure isobutane. A purge stream removed continuously, contains 85% n-butane and 15% impurity (mole%). The feed stream is n-butane containing 1% impurity (mole%). The flow rate of the purge stream will be....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution