Pick up the metal refractory from the following: ?->(Show Answer!)

Question Set

1. Pick up the metal refractory from the following:

Show Similar Question And Answers

QA->Which is the artificial form of aluminium oxide used for making refractory crucibles?....

QA->If a non-metal is added to the interstitial sites of a metal, then the metal becomes?....

QA->Pick out the adjective from the following sentence:”Neha comes here every day”....

QA->.In the following question the mathematical number follow according to a pattern.Discover that pattern and then pick up the missing number from the answer choices: 2,5,9,19,37,?....

QA->Mercury is transported in metal containers made of which metal?....

MCQ->The simplest method of welding two pieces of metal together is known as pressure welding.The ends of a metal are heated to a white heat-for iron,the welding temperature should be about 1300C-in a flame.At this temperature the metal becomes plastic.The ends are pressed or hammered together,and the joint is smoothed off.Care must be taken to ensure that surfaces are thoroughly clean first,for dirt will weaken the weld.Moreover,the heating of iron or steel to a high temperature cause oxidation,and a film of oxide is added to the heated surfaces.For this reason,flux is applied to the heated metal.At welding heat,flux melts and the oxide particles are dissolved in it together with any other impurities which may be present.The metal surfaces are pressed together,and the flux is squeezed out from the center of the weld.A number of different types of weld may be used,but for fairly thick bars of metals,a vee-shaped belt should be normally employed.It is rather stronger than ordinary butt weld. The simplest way of welding two pieces of metal together is....

MCQ->Pick out thể one word for - a secret arrangement....

MCQ->Pick up the metal refractory from the following:....

MCQ->An insulating refractory brick should have high porosity and low thermal conductivity. Which of the following is not used for inducing porosity in the insulating refractory bricks during its manufacture ?....

MCQ->A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of thermal conductivity 0.14 W/m.K and thickness __________ metre.....

Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions Question ANSWER With Solution