Question Set

1. The aggregate containing moisture in pores and having its suface dry, is known as






Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->Plants that grow in a dry habitat like deserts and can survive without moisture?....
QA->Xerophytes are plants which can grow in regions having how moisture?....
QA->….is calculated by taking a measure of all sources of income in the aggregate and dividing it by the total population?....
QA->Guttation occurs through specialised pores known as .....?....
QA->In some plants; water oozes through certain pores in the form of liquid and this phenomenon is called?....
MCQ->The aggregate containing moisture in pores and having its suface dry, is known as....
MCQ->In a laboratory test run, the rate of drying was found to be 0.5 x 10-3 kg/m2.s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m2/kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is....
MCQ->200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 x 10-3 kg/m2.s. The initial moisture content of the solid is 0.2 kg moisture/kg dry solid. The interfacial area available for drying is 4 m2/1000 kg of dry solid. The moisture content at the end of the drying period is (in kg moisture/kg dry solid)....
MCQ->The rate of infiltration normally declines rapidly during the early part of rainstorm event and reaches a constant value after several hours of rainfall. The factors responsible for this phenomenon are the filling of fine soil pores with water, which reduces capillary forces moistened soil, clay particles to swell and reduce the size of pores raindrop impact breaking up with soil clumps, splashing fine particles into pores....
MCQ->A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls/ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids))....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution