Question Set

1. An array of parallel rectangular bars and spaces that together represent a single data element or character particularly symbiology





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->A and B can do a work in 12 days B and C together can do it in 15 days and C and A together in 20 days. If A,B,C work together, they will complete the work in?....
QA->P and Q need 8 days to complete a work. Q and R need 12 days to complete the same work. But P, Q and R together can finish it in 6 days. How man D. 4 days will be needed if P and R together do it?....
QA->In a relational database, this is a data structure that organizes the information about a single topic into rows and columns–....
QA->A can do a piece of work in 4 hours . A and C together can do it in just 2 hours, while B and C together need 3 hours to finish the same work. B alone can complete the work in --- days.....
QA->P can do a work in the same time in which Q and R together can do it. If P and Q work together, the work can be completed in 10 days. R alone needs 50 days to complete the same work. then Q alone can do it in....
MCQ->An array of parallel rectangular bars and spaces that together represent a single data element or character particularly symbiology....
MCQ->Which of the following statements are correct about the C#.NET code snippet given below? int[] a = {11, 3, 5, 9, 4}; The array elements are created on the stack. Refernce a is created on the stack. The array elements are created on the heap. On declaring the array a new array class is created which is derived from System.Array Class. Whether the array elements are stored in the stack or heap depends upon the size of the array.....
MCQ->Consider the following statements (L is the length of array between centres of end antennas and A is wave-length)Width of major lobe between nulls of broad side array and end fire array are different.Directive gain of broadside array and end fire array are different.Directive gain of broadside array is 4 Which of the above statements are correct?....
MCQ->Consider the following statements about an array in Pascal An array has a fixed predetermined number of components.Any component of an array can be accessed using an index.An array variable name refers to a group of quantities by a single name.When array variables are used an appropriate declaration is required. Which of the above are correct?....
MCQ->The simplest method of welding two pieces of metal together is known as pressure welding.The ends of a metal are heated to a white heat-for iron,the welding temperature should be about 1300C-in a flame.At this temperature the metal becomes plastic.The ends are pressed or hammered together,and the joint is smoothed off.Care must be taken to ensure that surfaces are thoroughly clean first,for dirt will weaken the weld.Moreover,the heating of iron or steel to a high temperature cause oxidation,and a film of oxide is added to the heated surfaces.For this reason,flux is applied to the heated metal.At welding heat,flux melts and the oxide particles are dissolved in it together with any other impurities which may be present.The metal surfaces are pressed together,and the flux is squeezed out from the center of the weld.A number of different types of weld may be used,but for fairly thick bars of metals,a vee-shaped belt should be normally employed.It is rather stronger than ordinary butt weld. The simplest way of welding two pieces of metal together is....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution