1. Assertion (A): Field emission is substantially independent of temperature. Reason (R): When a high electric field is created at metal surface field emission may occur.





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->___ may by law constitute a High Court for a Union Territory or declare any court in any such Territory to be a High Court.?....
QA->The capacity of an electric field to do work on an electric charge?....
QA->Which type of soil is developed in areas with high temperature & high rainfall?....
QA->“Long years ago we made a tryst with destiny, and now the time comes when we shall redeem our pledge, not wholly or in full measure, but very substantially. At the stroke of the midnight hour, when the world sleeps, India will awake to life and freedom.” Whose words are these?....
QA->If a non-metal is added to the interstitial sites of a metal, then the metal becomes?....
MCQ->Assertion (A): Field emission is substantially independent of temperature. Reason (R): When a high electric field is created at metal surface field emission may occur.

....
MCQ->The simplest method of welding two pieces of metal together is known as pressure welding.The ends of a metal are heated to a white heat-for iron,the welding temperature should be about 1300C-in a flame.At this temperature the metal becomes plastic.The ends are pressed or hammered together,and the joint is smoothed off.Care must be taken to ensure that surfaces are thoroughly clean first,for dirt will weaken the weld.Moreover,the heating of iron or steel to a high temperature cause oxidation,and a film of oxide is added to the heated surfaces.For this reason,flux is applied to the heated metal.At welding heat,flux melts and the oxide particles are dissolved in it together with any other impurities which may be present.The metal surfaces are pressed together,and the flux is squeezed out from the center of the weld.A number of different types of weld may be used,but for fairly thick bars of metals,a vee-shaped belt should be normally employed.It is rather stronger than ordinary butt weld. The simplest way of welding two pieces of metal together is....
MCQ->Assertion (A): The amount of photoelectric emission depends on the intensity of incident light. Reason (R): Photo electric emission can occur only if frequency of incident light is less than threshold frequency.

....
MCQ->Assertion (A): At a temperature of 1000 K, thermionic emission current is about 0.1 A/cm2 of surface.Reason (R): Thermionic emission current is given by Ith = SA0 T2 e-Ew/kT.

....
MCQ->Assertion (A): When cathode temperature is increased from 2500 K to 2550 K, thermionic emission current may increase by about 50%.Reason (R): Thermionic emission current ∝ T2 e-Ew/kT.

....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions