If a microstrip is enclosed in a metal enclosure ?->(Show Answer!)

Question Set

1. If a microstrip is enclosed in a metal enclosure

Show Similar Question And Answers

QA->Fear of being enclosed in a small closed space....

QA->A small enclosure for cattle, sheep, poultry etc....

QA->If a non-metal is added to the interstitial sites of a metal, then the metal becomes?....

QA->Mercury is transported in metal containers made of which metal?....

QA->Which pair of metals constitutes the lightest metal and the heaviest metal; respectively?....

MCQ->If a microstrip is enclosed in a metal enclosure....

MCQ->The simplest method of welding two pieces of metal together is known as pressure welding.The ends of a metal are heated to a white heat-for iron,the welding temperature should be about 1300C-in a flame.At this temperature the metal becomes plastic.The ends are pressed or hammered together,and the joint is smoothed off.Care must be taken to ensure that surfaces are thoroughly clean first,for dirt will weaken the weld.Moreover,the heating of iron or steel to a high temperature cause oxidation,and a film of oxide is added to the heated surfaces.For this reason,flux is applied to the heated metal.At welding heat,flux melts and the oxide particles are dissolved in it together with any other impurities which may be present.The metal surfaces are pressed together,and the flux is squeezed out from the center of the weld.A number of different types of weld may be used,but for fairly thick bars of metals,a vee-shaped belt should be normally employed.It is rather stronger than ordinary butt weld. The simplest way of welding two pieces of metal together is....

MCQ->Assertion (A): Microstrip is very commonly used in microwave integrated circuits.Reason (R): Microstrip has an easy access to the top-surface so that active and passive discrete components can be easily mounted.

MCQ->Consider the following statements : 1. Dock is a marine structure for mooring up vessels, loading and unloading of passengers and/or cargo. 2. Dry dock is generally used only for carrying out repairs, inspections and painting. 3. Wet dock is an enclosed or partially enclosed basin provided with locks and entrance gate to keep the water level at a fairly constant level. Which of the statements given above are correct ?....

MCQ->__________ closure is the weakest enclosure for cylindrical vessels.....

Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions Question ANSWER With Solution