Thermit, used in thermit welding, is a mixture of ?->(Show Answer!)

Question Set

1. Thermit, used in thermit welding, is a mixture of

Show Similar Question And Answers

QA->In a mixture of 35 litres, the ratio of milk and water is 5 : Another 5 litres of milk is added to the mixture. The ratio of milk and water in the new mixture is—....

QA->Which is used in welding industry?....

QA->The elements used in welding are?....

QA->Which gases are used for gas welding?....

QA->The gases used in different types of welding would include?....

MCQ->Thermit, used in thermit welding, is a mixture of....

MCQ->The simplest method of welding two pieces of metal together is known as pressure welding.The ends of a metal are heated to a white heat-for iron,the welding temperature should be about 1300C-in a flame.At this temperature the metal becomes plastic.The ends are pressed or hammered together,and the joint is smoothed off.Care must be taken to ensure that surfaces are thoroughly clean first,for dirt will weaken the weld.Moreover,the heating of iron or steel to a high temperature cause oxidation,and a film of oxide is added to the heated surfaces.For this reason,flux is applied to the heated metal.At welding heat,flux melts and the oxide particles are dissolved in it together with any other impurities which may be present.The metal surfaces are pressed together,and the flux is squeezed out from the center of the weld.A number of different types of weld may be used,but for fairly thick bars of metals,a vee-shaped belt should be normally employed.It is rather stronger than ordinary butt weld. The simplest way of welding two pieces of metal together is....

MCQ->A jar contains a mixture of milk and water in the respective ratio of 3:1. When 4 litre of the mixture is taken out and thereafter 3 litre of milk is added to the remaining mixture. The respective ratio of milk and water in the resultant mixture thus formed is 4:1. What was the initial quantity of water in the mixture....

MCQ->Thermit welding is categorised as the __________ welding.....

MCQ->Projection welding & stud welding is categorised as the __________ welding.....

Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions Question ANSWER With Solution