Question Set

1. In the process of freeze drying, a dense cell suspension is placed in small vials and is frozen at





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->What is the dense mass of small water drops on smoke particles in the lower layers of the atmosphere?....
QA->A, B, C, D, E and F are sitting in six chairs regularly placed around a round table. It is observed that A is between D and F, C is opposite to D, D and E are not on neighboring chairs. Which one of the following must be true ?....
QA->Name the non -membrane bound cell organelle which is present in both eukaryotic and prokaryotic cell?....
QA->Spacing between the boundary of the cell and the text inside the cell in a word table.....
QA->Trees with hardwood and dense canopy are generally found in which forests?....
MCQ->In the process of freeze drying, a dense cell suspension is placed in small vials and is frozen at....
MCQ->200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 x 10-3 kg/m2.s. The initial moisture content of the solid is 0.2 kg moisture/kg dry solid. The interfacial area available for drying is 4 m2/1000 kg of dry solid. The moisture content at the end of the drying period is (in kg moisture/kg dry solid)....
MCQ->A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls/ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids))....
MCQ->There are five books A,B,C,D and E placed on a table.If A is placed below E,C is placed above D,B is placed below A and D is placed above E,then which of the following books touch the surface of the table?....
MCQ->A 25 cm x 25 cm x 1 cm flat sheet weighing 1.2 kg initially was dried from both sides under constant drying rate conditions. It took 1500 seconds for the weight of the sheet to reduce to 1.05 kg. Another 1m x 1m x 1cm flat sheet of the same material is to be dried from one side only.Under the same constant drying rate conditions, the time required for drying (in seconds) from its initial weight of 19.2 kg to 17.6 kg is....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution