1. Which form of aluminium oxide is hard as diamond?

Answer: Corundum

Reply

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->Which form of aluminium oxide is hard as diamond?....
QA->Which is the artificial form of aluminium oxide used for making refractory crucibles?....
QA->Aluminium surface are often ‘anodized’. This means deposition of a layer of which oxide?....
QA->Which is the black impure aluminium oxide mineral found in nature?....
QA->Aluminium oxide is a/an?....
MCQ->If 1.5 moles of oxygen combines with aluminium to form Al2O3, then the weight of aluminium (atomic weight = 27 ) used in this reaction is __________ gm....
MCQ->The simplest method of welding two pieces of metal together is known as pressure welding.The ends of a metal are heated to a white heat-for iron,the welding temperature should be about 1300C-in a flame.At this temperature the metal becomes plastic.The ends are pressed or hammered together,and the joint is smoothed off.Care must be taken to ensure that surfaces are thoroughly clean first,for dirt will weaken the weld.Moreover,the heating of iron or steel to a high temperature cause oxidation,and a film of oxide is added to the heated surfaces.For this reason,flux is applied to the heated metal.At welding heat,flux melts and the oxide particles are dissolved in it together with any other impurities which may be present.The metal surfaces are pressed together,and the flux is squeezed out from the center of the weld.A number of different types of weld may be used,but for fairly thick bars of metals,a vee-shaped belt should be normally employed.It is rather stronger than ordinary butt weld. The simplest way of welding two pieces of metal together is...
MCQ->Consider the following statements related to interchanges: 1. In diamond interchange there is the possibility of illegal wrong-way turns. 2. Diamond interchange is far superior to cloverleaf design. Which of the statements given above is/are correct ?...
MCQ->Which of the following statements is/are true for the diamond structure? Coordination number is four.Packing fraction is 0.34Copper crystallizes into diamond structureLattice is FCC....
MCQ->A metal oxide is reduced by heating it in a stream of hydrogen. After complete reduction, it is found that 3.15 gm of the oxide has yielded 1.05 gm of the metal. It may be inferred that the...
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution