1. ഇന്ത്യൻ റയിൽവേയുടെ ആദ്യ Cable-Stayed rail bridge? [Inthyan rayilveyude aadya cable-stayed rail bridge?]

Answer: Anji Khad Bridge

Reply

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Tags
Show Similar Question And Answers
QA->ഇന്ത്യൻ റയിൽവേയുടെ ആദ്യ Cable-Stayed rail bridge?....
QA->ഇന്ത്യൻ റയിൽവേയുടെ ആദ്യ Cable-Stayed rail bridge?....
QA->ഇന്ത്യൻ റയിൽവേയുടെ ആദ്യ Cable-Stayed rail bridge?....
QA->ഇന്ത്യൻ റയിൽവേയുടെ ആദ്യ 12000 HP Locomotive?....
QA->ഇന്ത്യൻ റയിൽവേയുടെ ആദ്യ 12000 HP Locomotive?....
MCQ->Wearing locations of rails and their reasons are listed below : 1. Wear at end of rails : Loose fish bolts 2. Wear at sides of rail head : Constant lerake application 3. Wear on the top of rail head on tangent truck : Rigidity of wheel base 4. Wear on top of rail head on curves : Lesser area of contact between wheel and rail Which of the pairs given above are correctly matched ?...
MCQ->You are setting up a network in a school. You need to network 5 computers for the file and printer sharing. You want to use some donated cable and Ethernet adapters. You identify the donated adapters as ARCnet coaxial network adapters and 10Base2 Ethernet network adapters. You install an Ethernet adapter in each of the 5 computers and connect the donated cable. The computers are NOT able to maintain reliable communication. You suspect that you are NOT using the correct type of coaxial cable. Which type of coaxial cable should you be using?...
MCQ->You have been given the task of installing cables for an Ethernet network in your office. The building is an older one, and-you have limited work space. In addition, the network cable will have to share the existing conduit with telephone cable, and cable segments will be up to 135 meters in length. Which cable is best suited to this installation?...
MCQ->The spool of cable, originally at rest, has a mass of 200 kg and a radius of gyration of kG = 325 mm. If the spool rests on two small rollers A and B and a constant horizontal force of P = 400 N is applied to the end of the cable, compute the angular velocity of the spool when 8 m of cable has been unraveled. Neglect friction and the mass of the rollers and unraveled cable....
MCQ->A network administrator is connecting hosts A and B directly through their Ethernet interfaces, as shown in the illustration. Ping attempts between the hosts are unsuccessful. What can be done to provide connectivity between the hosts? A crossover cable should be used in place of the straight-through cable. A rollover cable should be used in place of the straight-through cable. The subnet masks should be set to 255.255.255.192. A default gateway needs to be set on each host. The subnet masks should be set to 255.255.255.0....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution