Which metal is extracted by thermal reduction process? ?->(Show Answer!)

1. Which metal is extracted by thermal reduction process?

Answer: Copper

Tags

Show Similar Question And Answers

QA->Which metal is extracted by thermal reduction process?....

QA->The active metals are extracted from their ores by the process of reduction with?....

QA->Which metal is extracted by electrolytic reaction method?....

QA->The mineral from which a metal can be profitably extracted are called?....

QA->The study of metals and the overall process by which metals are extracted from its ores are called?....

MCQ->The simplest method of welding two pieces of metal together is known as pressure welding.The ends of a metal are heated to a white heat-for iron,the welding temperature should be about 1300C-in a flame.At this temperature the metal becomes plastic.The ends are pressed or hammered together,and the joint is smoothed off.Care must be taken to ensure that surfaces are thoroughly clean first,for dirt will weaken the weld.Moreover,the heating of iron or steel to a high temperature cause oxidation,and a film of oxide is added to the heated surfaces.For this reason,flux is applied to the heated metal.At welding heat,flux melts and the oxide particles are dissolved in it together with any other impurities which may be present.The metal surfaces are pressed together,and the flux is squeezed out from the center of the weld.A number of different types of weld may be used,but for fairly thick bars of metals,a vee-shaped belt should be normally employed.It is rather stronger than ordinary butt weld. The simplest way of welding two pieces of metal together is...

MCQ->The active metals are extracted from their ores by the process of reduction with?...

MCQ->Consider the following statements in regard to aerobic and anaerobic treatment processes : 1. Biomass production in the aerobic treatment process is more as compared to the anaerobic treatment process. 2. Start-up period is more in the aerobic treatment process as compared to the anaerobic treatment process. 3. Energy consumption and production is more in the aerobic treatment process as compared to the anaerobic treatment process. Which of the statements given above is/are correct ?...

MCQ->Consider the following statements If ensemble and time averages of a random process are identical, the process is ergodic.If ensemble and time average of a random process are not identical, the process is ergodic.An ergodic process is stationary.A stationary process is necessarily ergodic. Which of the above statements are correct?...

MCQ->Thermal conductivity based continuous flue gas analyser makes use of varying thermal conductivity of the constituents of flue gases. Which of the following constituents of flue gases has the maximum thermal conductivity ?...

Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions Question ANSWER With Solution