1. When ore is heated generally in absence of air then what is process called?

Answer: Calcination

Reply

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->When ore is heated generally in absence of air then what is process called?....
QA->What is formed when white phosphorus is heated at 540 K in the absence of air?....
QA->Which substance is obtained when coal is heated in the absence of air?....
QA->Heating the ore below its melting point in the absence of air I to remove volatile impurities is known as?....
QA->The method of concentrating the ore which makes use of the difference in density between ore and impurities is called?....
MCQ->When coal is strongly heated continuously for 42 to 48 hours in the absence of air in a closed vessel, the process is known as __________ of fuel....
MCQ->The simplest method of welding two pieces of metal together is known as pressure welding.The ends of a metal are heated to a white heat-for iron,the welding temperature should be about 1300C-in a flame.At this temperature the metal becomes plastic.The ends are pressed or hammered together,and the joint is smoothed off.Care must be taken to ensure that surfaces are thoroughly clean first,for dirt will weaken the weld.Moreover,the heating of iron or steel to a high temperature cause oxidation,and a film of oxide is added to the heated surfaces.For this reason,flux is applied to the heated metal.At welding heat,flux melts and the oxide particles are dissolved in it together with any other impurities which may be present.The metal surfaces are pressed together,and the flux is squeezed out from the center of the weld.A number of different types of weld may be used,but for fairly thick bars of metals,a vee-shaped belt should be normally employed.It is rather stronger than ordinary butt weld. The simplest way of welding two pieces of metal together is...
MCQ->When the coal is heated in absence of air, it is called its...
MCQ->Coal is heated in absence of air for 7 minutes at a temperature of about __________ °C, during its volatile matter determination for proximate analysis....
MCQ->Consider the following statements in regard to aerobic and anaerobic treatment processes : 1. Biomass production in the aerobic treatment process is more as compared to the anaerobic treatment process. 2. Start-up period is more in the aerobic treatment process as compared to the anaerobic treatment process. 3. Energy consumption and production is more in the aerobic treatment process as compared to the anaerobic treatment process. Which of the statements given above is/are correct ?...
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution