Question Set

1. In a continuous flow stirred tank reactor, the composition of the exit stream





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->A large tank having a small hole at the bottom is filled with water to a height h. if the stream of water coming out of the hole is directed vertically upwards it will?....
QA->In which direction of flow of stream is controlled by rock structure?....
QA->The velocity of flow of a liquid through an orifice at the bottom of a tank depends on the?....
QA->Which Chief Minister holds the record for holding the office for the longest continuous term?....
QA->Which crop requires continuous semiaquatic condition for cultivation?....
MCQ->In a continuous flow stirred tank reactor, the composition of the exit stream....
MCQ->An irreversible aqueous phase reaction, A + B P, is carried out in an adiabatic mixed flow reactor. A feed containing 4kmole/m3 of each A and B enters the reactor at 8m3 /hr. If the temperature of the exit stream is never to exceed 390 K, what is the maximum inlet feed temperature allowed? Data: Heat of reaction = - 50 kJ/mole Density of the reacting mixture = 1000kg/m3 Specific heat of reacting mixture = 2kJ/kg.K The above data can be assumed to be independent of temperature and composition.....
MCQ->In case of a __________ reactor, the composition in the reactor and at the exit of the reactor is the same.....
MCQ->A pollutant P degrades according to first order kinetics. An aqueous stream containing P at 2 kmole/m3 and volumetric flow rate 1m3 /h requires a mixed flow reactor of volume V to bring down the pollutant level to 0.5 kmole/m3 . The inlet concentration of the pollutant is now doubled and the volumetric flow rate is tripled. If the pollutant level is to be brought down to the same level of 0.5 kmole/m3 , the volume of the mixed flow reactor should be increased by a factor of....
MCQ->Water is entering a storage tank at a temperature T0 and flow rate Q0 and leaving at a flow rate Q and temperature T. There are negligible heat losses in the tank. The area of cross-section of the tank is A0. The model that describes the dynamic variation of temperature of water in the tank with time is given as : ....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution