When the gear ratio through the transmission is 1:1,the transmission is in ?->(Show Answer!)

Question Set

1. When the gear ratio through the transmission is 1:1,the transmission is in

Show Similar Question And Answers

QA->In an automobile gear transmission the counter shaft drive gear is meshed with the gear on the:....

QA->The ratio of bases of a cylinder and a cone are in the ratio 3: Volume of cylinder and cone are in the ratio 9: then their heights are in the ratio?....

QA->In a mixture of 35 litres, the ratio of milk and water is 5 : Another 5 litres of milk is added to the mixture. The ratio of milk and water in the new mixture is—....

QA->Present ages of Kiran and Syam are in the ratio of 5:4 respectively. Three years hence, the ratio of their ages will become 11:9 respectively. What is Syam"s present age in years?....

QA->P യും Q യും തമ്മിലുള്ള ratio 6: Q ന് p യെക്കാൾ 4 വയസ് അധികം ഉണ്ട് . എങ്കിൽ 4 വർഷം കഴിഞ്ഞു p:Q തമ്മിലുള്ള ratio എത്ര ?....

MCQ->Gear A has a weight of 1.5 lb, a radius of 0.2 ft, and a radius of gyration of ko = 0.13ft. The coefficient of friction between the gear rack B and the horizontal surface is = 0.3. If the rack has a weight of 0.8 lb and is initially sliding to the left with a velocity of (vB)2 = 8 ft/s to the left. Neglect friction between the rack and the gear and assume that the gear exerts only a horizontal force on the rack.....

MCQ->A fixed gear having 200 teeth is in mesh with another gear having 50 teeth. The two gears are connected by an arm. The number of turns made by the smaller gear for one revolution of arm about the centre of bigger gear is....

MCQ->A petrol engine of a car develops 125 N-m torque at 2700 r.p.m. The car is driven in second gear having gear ratio of 1.75. The final drive ratio is 4.11. If the overall transmission efficiency is 90%, then the torque available at the driving wheels is....

MCQ->For the gear train, If θ1 = 2 rad. clockwise and the torque of gear 1 is 10 lb-ft, what is the displacement and torque of gear 7.....

MCQ->The rotation of link AB creates an oscillating movement of gear F. If AB has an angular velocity of AB = 8 rad/s, determine the angular velocity of gear F at the instant shown. Gear E is a part of arm CD and pinned at D to a fixed point.....

Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions Question ANSWER With Solution