1. Height of liquid in agitation tank is normally maintained equal to the tank diameter. However, if the tank is too tall and a large liquid hold up is desired, then two or more impellers mounted on the same shaft may be used. The clearance between the tank bottom and the bottom most impeller should be about (where, D = impeller diameter)





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->A large tank having a small hole at the bottom is filled with water to a height h. if the stream of water coming out of the hole is directed vertically upwards it will?....
QA->If two bodies of different masses, initially at rest, are acted upon by the same force for the same time, then the both bodies acquire the same?....
QA->Dr Ambedkar had said that Article ___ should normally remain a 'dead letter' and would be used only in the 'last resort'.?....
QA->Dr. Ambedkar had said the "Article ___ should normally remain a 'dead letter' and would be used only in the 'last resort'.?....
QA->The pressure at the bottom of a liquid tank does not depend on which area?....
MCQ->Height of liquid in agitation tank is normally maintained equal to the tank diameter. However, if the tank is too tall and a large liquid hold up is desired, then two or more impellers mounted on the same shaft may be used. The clearance between the tank bottom and the bottom most impeller should be about (where, D = impeller diameter)....
MCQ->Read the following passage carefully and choose the most appropriate answer to the question out of the four alternatives. A classless society, however, does not mean a society without leaders. It means rather one in which every citizen becomes for the first time eligible for leadership, if he has the power to lead. It means a society in which every one is given, as far as possible, the chance to develop this power by the widest diffusion of educational opportunities in the broadest sense, and by keeping the career wide open to talents of every useful kind. It is often said that a community of equals will not allow itself to be led. But in fact, most men are, in most things, very willing to be led, and more in danger of giving their leaders too much than too little authority, especially if they are free to choose them, and assured that the leaders cannot exploit them for personal economic advantage leadership, so far from disappearing, will come into its own in a truly democratic society. But it is likely to be a more diffused leadership than we are used to for a better-nurtured people will have more citizens with strong wills and minds of their own, wishful to lead some in politics, some in industry, and some in professions and arts of life. This is the idea of a classless society. Some will reject it as contrary to their interest, some as utopian and against 'Human nature,' for there are some who deny, indeed if not in word, that the aim of society should be to promote the greatest happiness and welfare of the greatest number and others who hold, with pessimistic honesty, that most men must be driven and not led. What is the tone adopted by the author in this passage?....
MCQ->Two shafts 'A' and 'B' are made of same material. The shaft 'A' is solid and has diameter D. The shaft 'B' is hollow with outer diameter D and inner diameter D/2. The strength of hollow shaft in torsion is __________ as that of solid shaft.....
MCQ->Two shafts 'A' and 'B' have the same material. The shaft 'A' is solid of diameter 100 mm. The shaft 'B' is hollow with outer diameter 100 mm and inner diameter 50 mm. The torque transmitted by shaft 'B' is __________ as that of shaft 'A'.....
MCQ->The advantage of axial flow impellers over radial flow impellers is that axial flow impellers....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions