Question Set

1. Wet grinding in a revolving mill __________ as compared to dry grinding.





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->Which is the chief characteristic of wet and dry tropics?....
QA->Which is the chief characteristics of wet and dry tropics?....
QA->What will be If a pendulum clock be taken from the earth to a revolving artificial satellite?....
QA->Which teeth; is used for grinding?....
QA->Which part of human brain is most highly developed as compared to others?....
MCQ->Wet grinding in a revolving mill __________ as compared to dry grinding.....
MCQ->In case of a revolving mill, wet grinding compared to dry grinding....
MCQ->A. __________ mill is a revolving mill divided into two or more sections by perforated partitions in which preliminary grinding takes place at one end and the finishing grinding at the discharge end.....
MCQ->In a laboratory test run, the rate of drying was found to be 0.5 x 10-3 kg/m2.s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m2/kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is....
MCQ->The wet bulb temperature is lower in dry air than in wet air at the same temperature. A dry bulb thermometer registers a higher temperature than a wet bulb thermometer except at __________ percent relative humidity.....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution