Question Set

1. A rod 5 m in length is moving in a vertical plane. When it is inclined at 60° to horizontal, its lower end is moving horizontally at 3 m/sec and upper end is moving in vertical direction. The velocity of its upper end, is






Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->How many image can a man see if he stands between two plane mirrors inclined at an angle of 60°?....
QA->A particle moves in a plane with a constant acceleration in a direction different from the initial velocity. The path of the particle is?....
QA->An aeroplane is flying horizontally with a velocity of 600 km/h and at a height of 1960 m. When it is vertically at a point A on the ground a bomb is released from it. The bomb strikes the ground at point B. The distance AB is?....
QA->.....is an instrument for measuring horizontal and vertical angles.?....
QA->Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth?....
MCQ->A rod 5 m in length is moving in a vertical plane. When it is inclined at 60° to horizontal, its lower end is moving horizontally at 3 m/sec and upper end is moving in vertical direction. The velocity of its upper end, is....
MCQ->A bed of sand consists of three horizontal layers of equal thickness. The value of Darcy's k for the upper and lower layers is 1 x 10-2 cm/sec and that for the middle layer is 1 x 10-1 cm/sec. The ratio of the permeability of the bed in the horizontal direction to that in the vertical direction is....
MCQ->The velocity ratio in case of an inclined plane inclined at angle θ to the horizontal and weight being pulled up the inclined plane by vertical effort is....
MCQ->A ball moving with a velocity of 5 m/sec impinges a fixed plane at an angle of 45° and its direction after impact is equally inclined to the line of impact. If the coefficient of restitution is 0.5, the velocity of the ball after impact will be....
MCQ->A 600 mm long and 50 mm diameter rod of steel (E = 200 GPa, α = 12 x 10-6/°C) is attached at the ends to unyielding supports. When the temperature is 30°C there is no stress in the rod. After the temperature of the rod drops to - 20°C, the axial stress in the rod will be....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions