Question Set

1. A 2-metre diameter water pipe is required to withstand a 200 meter head of water. Assuming the limiting tensile stress for the pipe material to be 200 kg/cm2, the minimum thickness of the material of the pipe to be used will have to be





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->Area of a rectangle of 5 metre length and 4 metre breadth is:....
QA->A train having a length of 240 metre passes a post in 24 seconds. How long will it take to pass a platform having a length of 650 metre?....
QA->Area of a rectangle of 5 metre length and 4 metre breadth is....
QA->The ability of a material to withstand color change on exposure to light....
QA->‘I have been touring different parts of the world. During these travels, I have had the good fortune to come into contact with several saints and maharshis. But I have frankly to admit that I have never come across one who is spiritually greater than Swami Sree Narayana Guru of Kerala” Whose words are these?....
MCQ->A 2-metre diameter water pipe is required to withstand a 200 meter head of water. Assuming the limiting tensile stress for the pipe material to be 200 kg/cm2, the minimum thickness of the material of the pipe to be used will have to be....
MCQ->The difference in the reservoir level and the lowest point of the water mains is 180 m. The expected pressure due to water hammer is 7.5 kg/cm2 in a pressure conduit of diameter 1 m. Assuming the efficiency of the riveted joints of the pipe as 0.6 and minimum cover 3 mm for corrosion, the thickness of the pipe materials, is....
MCQ->A cylindrical shell made of mild steel plate of 100 cm diameter is to be subjected to an internal pressure of 10 kg/cm2. If the material yields at 2000 kg/cm2, assuming factor of safety as four and using maximum principal stress theory, thickness of the plate will be....
MCQ->If tensile stress of a steel rod of diameter D is 1400 kg/cm2 and bond stress is 6 kg/cm2, the required bond length of the rod is....
MCQ->Two steel plates each of width 150 mm and thickness 10 mm are connected with three 20 mm diameter rivets placed in a zig-zag pattern. The pitch of the rivets is 75 mm and gauge is 60 mm. If the allowable tensile stress is 150 MPa, the maximum tensile force that the joint can withstand is....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution