A mild steel rod having 50 mm diameter and 500 mm length is to be turned on a lathe.Determine the machining lime to reduce the rod to 45 mm in one pass when cutting speed is 30 m/min and a feed of 7 mm/rev is used: ?->(Show Answer!)

Warning: implode(): Invalid arguments passed in /www/wwwroot/jobquiz.info/mdiscuss.php on line 336
A mild steel rod having 50 mm diameter and 500 mm length is to be turned on a lathe.Determine the machining lime to reduce the rod to 45 mm in one pass when cutting speed is 30 m/min and a feed of 7 mm/rev is used: ?->(Show Answer!)

Question Set

1. A mild steel rod having 50 mm diameter and 500 mm length is to be turned on a lathe.Determine the machining lime to reduce the rod to 45 mm in one pass when cutting speed is 30 m/min and a feed of 7 mm/rev is used:

Ask Your Doubts Here

Comments

Show Similar Question And Answers

QA->Arun started walking towards North after walking 30m, he turned left and walked 40m. He then turned left and walked 30m. He again turned left and walked 50m. How far is he from his original position....

QA->A train having a length of 240 metre passes a post in 24 seconds. How long will it take to pass a platform having a length of 650 metre?....

QA->A man started to walk East. After moving a distance he turned to his right. After moving a distance he turned to his right again. After moving a little he turned in the end of his left. In which direction he going is now?....

QA->A train moving with uniform speed passed a bridge of length 2000 metres in 2 ½ minutes.It took ½ minutes to pass a telephone post.What is the length of the train in metres?....

QA->Speed of a speed-boat when moving in the direction perpendicular to the direction of the current is 25 km/h, speed of the current is 5 km/h. So, the speed of the boat against the current will be:....

MCQ->A mild steel rod having 50 mm diameter and 500 mm length is to be turned on a lathe.Determine the machining lime to reduce the rod to 45 mm in one pass when cutting speed is 30 m/min and a feed of 7 mm/rev is used:....

MCQ->The cutting speed for drilling aluminium, brass and bronze with carbon steel drills is __________ cutting speed for drilling mild steel with high speed steel drills.....

MCQ->A smooth can C, having a mass of 2 kg, is lifted from a feed at A to a ramp at B by a forked rotating rod. If the rod maintains a constant angular motion of = 0.5 rad/s, determine the force which the rod exerts on the can at the instant = 30°. Neglect the effects of friction in the calculation. The ramp from A to B is circular, having a radius of 700 min.....

MCQ->A 50 mm diameter rod is to be turned on a lathe at a cutting speed of 30 m/minute.The required spindle speed in rpm should be approximately....

MCQ->For machining a mild steel workpiece by a high speed steel tool, the average cutting speed is....

Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions Question ANSWER With Solution