Question Set

1. What will be equipotential surfaces for a pair of equal and opposite line charges?





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->Read the statements carefully and answer the question which follow: A cube has six sides each of a different colour.The red side is opposite black.The green side is between red and black.The blue side is adjacent to white .The brown side is adjacent to blue.The red side is face down.The side opposite brown is:....
QA->According to Newton’s third law every force is accompanied by an equal and opposite force. Then how can a movement take place?....
QA->Which public sector bank recently announced to do away with charges on NEFT and RTGS transactions through internet and mobile banking from July 1?....
QA->What work is work done in moving a positive charge on an equipotential surface?....
QA->Five equal forces of 10 N each are applied at one point and all are lying in one plane. If angles between them are equal, the resultant of these forces wil be?....
MCQ->What will be equipotential surfaces for a pair of equal and opposite line charges?....
MCQ->The simplest method of welding two pieces of metal together is known as pressure welding.The ends of a metal are heated to a white heat-for iron,the welding temperature should be about 1300C-in a flame.At this temperature the metal becomes plastic.The ends are pressed or hammered together,and the joint is smoothed off.Care must be taken to ensure that surfaces are thoroughly clean first,for dirt will weaken the weld.Moreover,the heating of iron or steel to a high temperature cause oxidation,and a film of oxide is added to the heated surfaces.For this reason,flux is applied to the heated metal.At welding heat,flux melts and the oxide particles are dissolved in it together with any other impurities which may be present.The metal surfaces are pressed together,and the flux is squeezed out from the center of the weld.A number of different types of weld may be used,but for fairly thick bars of metals,a vee-shaped belt should be normally employed.It is rather stronger than ordinary butt weld. The simplest way of welding two pieces of metal together is....
MCQ->The taxi charges in a city comprise of a fixed charge, together with the charge of the distance covered. For a journey of 16 km, the charges paid are Rs. 156 and for a journey of 24 km, the charges paid are Rs. 204. What will a person have to pay for travelling a distance of 30 km?....
MCQ->Consider the following statements relating to hydraulic gradient line and energy gradient line 1. In the case of a fluid flowing in a pipeline, hydraulic gradient line and energy gradient line may coincide. 2. The line joining the points representing piezometric heads is known as hydraulic gradient line. 3. In the case of ideal fluid, energy gradient line is always horizontal. 4. Hydraulic gradient line has a downward slope in the case of flow through pipes. Of these statements :....
MCQ->Match the following: List I (Characteristics) List II (Decrease) A.Paramagnetic1.All dipoles are aligned is one preferred directionB.Ferromagnetic2.Half the dipoles are aligned in opposite direction and have equal magnitudeC.Antiferromagnetic3.Half the dipoles (with equal magnitudes) are aligned in opposite direction to the other half having equal but lower magnitudeD.Ferrimagnetic4.All dipoles have equal magnitude but are randomly oriented

....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution