Warning: implode(): Invalid arguments passed in /www/wwwroot/jobquiz.info/mdiscuss.php on line 336
If the vacuum level inside the refrigerator is 30 mm of Hg the moisture boiling temperature will be: ?->(Show Answer!)
Question Set

1. If the vacuum level inside the refrigerator is 30 mm of Hg the moisture boiling temperature will be:





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->Blisters are formed more rapidly by the steam of boiling water in comparision to boiling water itself because ________.?....
QA->Plants that grow under average temperature and moisture are called?....
QA->If the door of a refrigerator is kept open with the main supply, the temperature of the room?....
QA->Boiling upto 72oC for at least '15 second then followed by immediate cooling to 4oc and storing at low temperature is called ?....
QA->The process in which a liquid changes into its vapour from its surface at a temperature below its boiling point is called?....
MCQ->If the vacuum level inside the refrigerator is 30 mm of Hg the moisture boiling temperature will be:....
MCQ->200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 x 10-3 kg/m2.s. The initial moisture content of the solid is 0.2 kg moisture/kg dry solid. The interfacial area available for drying is 4 m2/1000 kg of dry solid. The moisture content at the end of the drying period is (in kg moisture/kg dry solid)....
MCQ->It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%).....
MCQ->Equilibrium moisture of a solid is equal to the total moisture minus free moisture. Which of the following substances will have maxi-mum equilibrium moisture ?....
MCQ->A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls/ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids))....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution