Question Set

1. A shaft is designed on the basis of rigidity and stiffness.



Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->The Modulus of rigidity of a liquid is?....
QA->In order to give some concession to Indians in the field of administration, the Government of India Act, 1935 was designed on the basis of the recommendation of _____?....
QA->Which type of gear permits lower position of propeller shaft?....
QA->In an automobile gear transmission the counter shaft drive gear is meshed with the gear on the:....
QA->St. Peters Basilica in Rome was built under the patronage of Pope Julius II and Pope Leo X It was designed by?....
MCQ->A shaft is designed on the basis of rigidity and stiffness.....
MCQ->The 2-kg shaft CA passes through a smooth journal bearing at B. Initially, the springs, which are coiled loosely around the shaft, are unstretched when no force is applied to the shaft. In this position s = sª = 250 and the shaft is originally at rest. If a horizontal force of F = 5 kN is applied, determine the speed of the shaft at the instant s = 50 mm, sª = 450 mm. The ends of the springs are attached to the bearing at B and the caps at C and A.....
MCQ->The natural frequency of free torsional vibrations of a shaft is equal to (where q = Torsional stiffness of the shaft, and I = Mass moment of inertia of the disc attached at the end of a shaft)....
MCQ->For stable structures, one of the important properties of flexibility and stiffness matrices is that the elements on the main diagonal i) of a stiffness matrix must be positive ii) of a stiffness matrix must be negative iii) of a flexibility matrix must be positive iv) of a flexibility matrix must be negative The correct answer is....
MCQ->Two shafts 'A' and 'B' are made of same material. The shaft 'A' is solid and has diameter D. The shaft 'B' is hollow with outer diameter D and inner diameter D/2. The strength of hollow shaft in torsion is __________ as that of solid shaft.....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution