Question Set

1. Which encapsulations can be configured on a serial interface? Ethernet Token Ring HDLC Frame Relay PPP





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

  • By: guest on 02 Jun 2017 01.57 am
    Ethernet and Token Ring are LAN technologies and cannot be configured on a serial interface. PPP, HDLC, and Frame Relay are layer 2 WAN technologies that are typically configured on a serial interface.
Show Similar Question And Answers
QA->A girl started counting the fingers of her left hand, calling the thumb 1, the index finger 2, middle finger 3, ring finger 4, little finger 5 and then reversed the direction calling the ring finger 6 middle finger 7 and do on. She counted upto She ended counting on ……………… finger....
QA->Five bells ring at the intervals of 2,3,4,5 and 8 respectively. They will ring together after?....
QA->Six bells start ringing together and ring at intervals of 4, 8, 10, 12, 15 and 20 seconds respectively. how many times will they ring together in 60 minutes ?....
QA->P can do a work in the same time in which Q and R together can do it. If P and Q work together, the work can be completed in 10 days. R alone needs 50 days to complete the same work. then Q alone can do it in....
QA->Which part acts as a relay station for the incoming and outgoing impulses to and from the cerebrum?....
MCQ->Which encapsulations can be configured on a serial interface? Ethernet Token Ring HDLC Frame Relay PPP....
MCQ->Which WAN encapsulations can be configured on an asynchronous serial connection? PPP ATM HDLC SDLC Frame Relay....
MCQ->Which of the following are unique characteristics of half-duplex Ethernet when compared to full-duplex Ethernet? Half-duplex Ethernet operates in a shared collision domain. Half-duplex Ethernet operates in a private collision domain. Half-duplex Ethernet has higher effective throughput. Half-duplex Ethernet has lower effective throughput.....
MCQ->You are installing a network interface card on a computer with the following configuration: a 5867133 CPU, 16MB or RAM, a 800-MB IDE hard disk, a parallel port configured as LPT1, and a serial port configured as COM1, which is currently used by a mouse. In addition to the IDE host adapter and the video card, the following devices have been installed on the computer's expansion bus: a modem on COM2, a SCSI host adapter for a CD-ROM drive, and a sound card. The SCSI hose adapter is using IRQ 5, and the sound card is using IRQ 11. The network interface card that you are installing supports the following choices for IRQ: 2, 3, 4, 5, 9,10 and 11. Which IRQ(s) could you use for the network interface card without creating an IRQ conflict with another device?....
MCQ->You have your laptop directly connected into a router's Ethernet port. Which of the following are among the requirements for the copy flash tftp command to be successful? TFTP server software must be running on the router. TFTP server software must be running on your laptop. The Ethernet cable connecting the laptop directly into the router's Ethernet port must be a straight-through cable. The laptop must be on the same subnet as the router's Ethernet interface. The copy flash tftp command must be supplied the IP address of the laptop.....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution