Question Set

1. In the Binary numbering system, a (1) represents a jumper being shorted and a (0) represents a jumper being open. On a three-bit jumper block on a SCSI drive, how would an ID of logical 3 be set?






Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->Father is aged three times more than his son Anil. After 8 years, he would be two and a half times of Anil"s age. After further 8 years, how many times would he be of Anil"s age?....
QA->Father is aged three times more than his son Ram . After 8 years, he would be two and a half times of Ram"s age. After further 8 years, how many times would he be of Ram"s age?....
QA->Who, on the basis of logical reasoning rejected all existing religions and at the same time established a new religion called ‘Aananthamath’?....
QA->If KPM represents LON, then RTNJM represents....
QA->. Nasar invested Rs. 3,000 and Narayanan invested Rs. 4,000 to set up a partnership. In one year they got Rs.2,000 profit. If they split this in the ratio of their investment., how much would Nasar got?....
MCQ->In the Binary numbering system, a (1) represents a jumper being shorted and a (0) represents a jumper being open. On a three-bit jumper block on a SCSI drive, how would an ID of logical 3 be set?....
MCQ->What is the jumper setting on a SCSI device to configure it to use the fourth SCSI id? Remember, SCSI ids start with zero.....
MCQ->When installing a SCSI CD-ROM drive, you must set the CD-ROM SCSI adapter to:....
MCQ->You are installing a network interface card on a computer with the following configuration: a 5867133 CPU, 16MB or RAM, a 800-MB IDE hard disk, a parallel port configured as LPT1, and a serial port configured as COM1, which is currently used by a mouse. In addition to the IDE host adapter and the video card, the following devices have been installed on the computer's expansion bus: a modem on COM2, a SCSI host adapter for a CD-ROM drive, and a sound card. The SCSI hose adapter is using IRQ 5, and the sound card is using IRQ 11. The network interface card that you are installing supports the following choices for IRQ: 2, 3, 4, 5, 9,10 and 11. Which IRQ(s) could you use for the network interface card without creating an IRQ conflict with another device?....
MCQ->Consider the following; for a loss-less transmission line we can write, Zin = - jz0 for a shorted line with l = λ/8Zin = ± j ∞ for a shorted line with l = λ/4Zin= jz0 for an open line with l = λ/2Zin = 0 for a matched line of any length Select the correct answer using the codes given below codes.....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution