Question Set

1. After installing a sound card, the system locks up when a parallel port tape backup unit is also used. What is most likely the problem?






Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->Sound produced at a point is heard by a person after 5 second, while the same sound is heard by another person after 6 seconds. If the speed of sound is 300 m/s, what could be the maximum and minimum distances between the two persons?....
QA->Who are more likely to get tape- worms?....
QA->Which company has developed its largest power storage system in Asia at Osaka train station in Japan to reduce energy demand and provide emergency backup power to trains in Japan?....
QA->With which sports item is the foul card of red and black card is associated?....
QA->Which to card in Hockey is similar to yellow card in the foot-ball?....
MCQ->You are installing a network interface card on a computer with the following configuration: a 5867133 CPU, 16MB or RAM, a 800-MB IDE hard disk, a parallel port configured as LPT1, and a serial port configured as COM1, which is currently used by a mouse. In addition to the IDE host adapter and the video card, the following devices have been installed on the computer's expansion bus: a modem on COM2, a SCSI host adapter for a CD-ROM drive, and a sound card. The SCSI hose adapter is using IRQ 5, and the sound card is using IRQ 11. The network interface card that you are installing supports the following choices for IRQ: 2, 3, 4, 5, 9,10 and 11. Which IRQ(s) could you use for the network interface card without creating an IRQ conflict with another device?....
MCQ->After installing a sound card, the system locks up when a parallel port tape backup unit is also used. What is most likely the problem?....
MCQ->The following steps are necessary to obtain sufficient accuracy with the tape : 1. Keeping uniform tension on tape for each measurement: 2. "Breaking" tape on slopes are necessary to keep the tape level. 3. Keeping accurate count of the stations. 4. Keeping the tape on the line being measured. The correct sequence of these steps is....
MCQ->Statements: All the locks are keys. All the keys are bats. Some watches are bats. Conclusions: Some bats are locks. Some watches are keys. All the keys are locks.

....
MCQ->Which three statements are true about the operation of a full-duplex Ethernet network? There are no collisions in full-duplex mode. A dedicated switch port is required for each full-duplex node. Ethernet hub ports are preconfigured for full-duplex mode. In a full-duplex environment, the host network card must check for the availability of the network media before transmitting. The host network card and the switch port must be capable of operating in full-duplex mode.....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution