Question Set

1. In addition to I/O port addresses, SCSI adapters also use a range of ROM addresses for their onboard BIOS.



Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->All​ ​forms​ ​of​ ​ROM​ ​are​ ​also​ ​known​ ​as -----------------....
QA->MAC addresses are also known as?....
QA->BIOS stands for ?....
QA->India recently took over the operations of a part of Chabahar Port. In which country Chabahar Port is located?....
QA->Which port has become the first Indian port operator to achieve a new record of handling 200 million tonnes (MT) cargo movement?....
MCQ->In addition to I/O port addresses, SCSI adapters also use a range of ROM addresses for their onboard BIOS.....
MCQ->You are setting up a network in a school. You need to network 5 computers for the file and printer sharing. You want to use some donated cable and Ethernet adapters. You identify the donated adapters as ARCnet coaxial network adapters and 10Base2 Ethernet network adapters. You install an Ethernet adapter in each of the 5 computers and connect the donated cable. The computers are NOT able to maintain reliable communication. You suspect that you are NOT using the correct type of coaxial cable. Which type of coaxial cable should you be using?....
MCQ->You are installing a network interface card on a computer with the following configuration: a 5867133 CPU, 16MB or RAM, a 800-MB IDE hard disk, a parallel port configured as LPT1, and a serial port configured as COM1, which is currently used by a mouse. In addition to the IDE host adapter and the video card, the following devices have been installed on the computer's expansion bus: a modem on COM2, a SCSI host adapter for a CD-ROM drive, and a sound card. The SCSI hose adapter is using IRQ 5, and the sound card is using IRQ 11. The network interface card that you are installing supports the following choices for IRQ: 2, 3, 4, 5, 9,10 and 11. Which IRQ(s) could you use for the network interface card without creating an IRQ conflict with another device?....
MCQ->What is the jumper setting on a SCSI device to configure it to use the fourth SCSI id? Remember, SCSI ids start with zero.....
MCQ->When installing a SCSI CD-ROM drive, you must set the CD-ROM SCSI adapter to:....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution