1. Which command will show you whether a DTE or a DCE cable is plugged into serial 0?





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

  • By: guest on 02 Jun 2017 01.56 am
    The show controllers serial 0 command will show you whether either a DTE or DCE cable is connected to the interface. If it is a DCE connection, you need to add clocking with the clock rate command.
Show Similar Question And Answers
QA->Who said ‘Happiness is when what you think; what you say; and what you do are in harmony’?....
QA->If you want to visit sambhar lake; to which state you will go?....
QA->If you scored cannon; which game would you be playing?....
QA->If you wish to visit Golconda Fort; you will have to go to which state?....
QA->If you wish to visit Golconda Fort, you will have to go to which state?....
MCQ->Which command will show you whether a DTE or a DCE cable is plugged into serial 0?....
MCQ->You are setting up a network in a school. You need to network 5 computers for the file and printer sharing. You want to use some donated cable and Ethernet adapters. You identify the donated adapters as ARCnet coaxial network adapters and 10Base2 Ethernet network adapters. You install an Ethernet adapter in each of the 5 computers and connect the donated cable. The computers are NOT able to maintain reliable communication. You suspect that you are NOT using the correct type of coaxial cable. Which type of coaxial cable should you be using?....
MCQ->Question: On a T.V. channel, four serials A, B, C and D were screened, one on eacn day, on four consecutive days but not necessarily in that order. On which day was the serial C screened ? Statements: The first serial was screened on 23rd, Tuesday and was followed by serial D. Serial A was not screened on 25th and one serial was screened between serials A and B.

....
MCQ->You have been given the task of installing cables for an Ethernet network in your office. The building is an older one, and-you have limited work space. In addition, the network cable will have to share the existing conduit with telephone cable, and cable segments will be up to 135 meters in length. Which cable is best suited to this installation?....
MCQ->You have your laptop directly connected into a router's Ethernet port. Which of the following are among the requirements for the copy flash tftp command to be successful? TFTP server software must be running on the router. TFTP server software must be running on your laptop. The Ethernet cable connecting the laptop directly into the router's Ethernet port must be a straight-through cable. The laptop must be on the same subnet as the router's Ethernet interface. The copy flash tftp command must be supplied the IP address of the laptop.....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions