Question Set

1. Thorough planning must take place when setting up an 802.3 network. A maximum number of segments can separate any two nodes on the network. What is the maximum number of segments allowed between two nodes?






Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->The maximum speed at which data, can be transferred between two modes on a network is called:....
QA->Anil can lay railway track between two stations in 16 days. Subin can do the same job in 12 days. With the help of Jyothi, they completes the job in 4 days. How much days does it take for jyothi alone to complete the work?....
QA->A number consists of two digits.The digits in the ten’s place is 2 times of the digit in the unit’s place.If 36 is substracted from the number,the digits are reversed.The number is....
QA->Raj can do a piece of work in 5 hours. Hari and Siva can do it in 3 hours. Raj and Siva can do it in 4 hours. How long will Hari take to do it ?....
QA->Raj can do a piece of work in 5 hours. Hari and Siva can do it in 3 hours. Raj and Siva can do it in 4 hours. How long will Hari take to do it ?....
MCQ->Thorough planning must take place when setting up an 802.3 network. A maximum number of segments can separate any two nodes on the network. What is the maximum number of segments allowed between two nodes?....
MCQ->Repeaters are often used on an 802.3 network to help strengthen the signals being transmitted. As with the length of segments and the number of segments, a limit exists as to how many repeaters can be used between any two nodes. What is the maximum number of repeaters that can be used?....
MCQ->To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met? Each end of the trunk link must be set to the IEEE 802.1e encapsulation. The VTP management domain name of both switches must be set the same. All ports on both the switches must be set as access ports. One of the two switches must be configured as a VTP server. A rollover cable is required to connect the two switches together. A router must be used to forward VTP traffic between VLANs.....
MCQ->Which two statements are true for any concrete class implementing the java.lang.Runnable interface? You can extend the Runnable interface as long as you override the public run() method. The class must contain a method called run() from which all code for that thread will be initiated. The class must contain an empty public void method named run(). The class must contain a public void method named runnable(). The class definition must include the words implements Threads and contain a method called run(). The mandatory method must be public, with a return type of void, must be called run(), and cannot take any arguments.....
MCQ->You are the administrator of Windows 2000 Server network. On each server you format a separate system partition and a separate boot partition as NTFS. Several months later you shut down one of the computers for maintenance. When you try to restart the computer you receive the following error message "NTLDR is missing, press any key to restart". You want to install a new NTLDR file on the computer but you do not want to loose any settings you made since the installation. What should you do?....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution