<<= Back Next =>>
You Are On Multi Choice Question Bank SET 1415

70751. The ratio of ages of A and B ten years ago was 2:If the ratio of their present age is 3:4,then how old Is B now?

70752. If the remainder obtained by subtracting a number from its own square is 2 times the number,what is the number?

70753. If 100 is 20% of a number,then what the 120% of the number is?

70754. The next number in the following sequence is:10,20,32,46,62,----------

70755. Cast iron is a

70756. The hardness is the property of a material due to which it

70757. Malleable cast iron is produced

70758. Smelting is the process of

70759. The percentage of carbon in cast iron varies from

70760. The ability of a material to absorb energy in the plastic range is called

70761. If sin A=3/5,then tan A=

70762. A material is said to be allotropic, if it has

70763. Closed packed hexagonal space lattice is found in

70764. The hardness and tensile strength in austenitic stainless steel can be increased by

70765. The quenching of steel from the upper critical point results in a fine grained structure.

70766. An alloy steel which is work hardenable and which is used to make the blades of bulldozers, bucket wheel excavators and other earth moving equipment contain iron, carbon and

70767. Which of the following has a fine gold colour and is used for imitation jewellery?

70768. When the steel is normalised, its

70769. White cast iron has a high tensile strength and a low compressive strength.

70770. Dye penetrant method is generally used to locate

70771. The charge is fed into the blast furnace through the

70772. A small percentage of boron is added to steel in order to

70773. Which of the following process of steel making is in operation at Tata Iron and Steel Works, Jamshedpur?

70774. The unit cells

70775. Tungsten when added to steel __________ the critical temperature.

70776. Silicon when added to copper improves

70777. The alloying element which increases residual magnetism and coercive magnetic force in steel for magnets is

70778. Cast iron is manufactured in

70779. The lower critical point for all steels is

70780. Haematite iron ore contains iron about

70781. The material in which the atoms are arranged regularly in some directions but not in others, is called

70782. The steel produced by bessemer or open hearth process is __________ to that produced by L-D process.

70783. Crystal structure of a material is, generally, examined by

70784. Iron-carbon alloys containing 1.7 to 4.3% carbon are known as

70785. The coke in the charge of blast furnace

70786. Nimonic contains __________ percentage of nickel as that of Inconel.

70787. The heat treatment process used for softening hardened steel is

70788. The dieing down of a white flame during the operation of a bessemer converter indicates that the air is burning out silicon and manganese.

70789. The electric process of steel making is especially adopted to

70790. Iron ore is, usually, found in the form of

70791. The hardness of steel increases if it contains

70792. In full annealing, the hypo-eutectoid steel is heated from 30° C to 50° C above the upper critical temperature and then cooled

70793. Ferrite and pearlite makes the steel soft and ductile.

70794. The lower critical temperature

70795. Nodular cast iron is produced by adding __________ to the molten cast iron.

70796. Free carbon in iron makes the metal

70797. The cupola is used to manufacture

70798. The type of space lattice found in gamma-iron is

70799. The property of a material due to which it breaks with little permanent distortion, is called

70800. Which of the following when used in ordinary low carbon steels, makes the metal ductile and of good bending qualities?

<<= Back Next =>>
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions