101. The main advantage of a long rail over short one, is
102. Widening of gauge is provided if degree of the curve, is
103. Continuity of electric current across welded rail joints, is maintained by
104. Sand may be used as ballast for
105. Cast iron sleeper, is
106. On Indian Railways, angle of crossing between gauge faces of Vee, is generally calculated by
107. For an effective administration, Indian railway system has been divided into
108. In a railway track, permissible gauge with tolerance under loaded condition, is
109. A turn-in-curve is defined as
110. Advantage of automatic signalling, is:
111. Track construction involves preparation of
112. In permanent way, ballast
113. The lengths of the standard crossings in India for Broad gauge and Metre gauge tracks is same for
114. It is time they ......... home.?
115. On either side of the centre line of rails, a cant of 1 in 20 in the sleeper is provided for a distance of
116. Anti-creep anchors are fixed to rails by
117. Who has been conferred with the first ‘Sita Puraskar’?
118. Pick up the incorrect statement from the following. Required tilt of 1 in 20 is provided
119. A triangle of railway consists of
120. Steel sleepers are
121. If D is distance between centres of two parallel tracks of gauge G with entire curved leads and equal angles of crossing, total length of crossover, is
122. Staggered rail joints are generally provided
123. Bull headed rails are generally provided on
124. The check rails are placed opposite the crossing so that
125. Weight and cross section of the rails are decided on