Question Set

1. The maximum pressure which a soil can carry without shear failure, is called





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->Name the type of illustration which contains only solid areas of black or any process color without tints which can be reproduced without half toning ?....
QA->P can do a work in the same time in which Q and R together can do it. If P and Q work together, the work can be completed in 10 days. R alone needs 50 days to complete the same work. then Q alone can do it in....
QA->The material which can be deformed permanently by heat and pressure is called a?....
QA->Which winds are flowing from sub tropical high pressure to sub polar low pressure?....
QA->Blood pressure is the pressure exerted on the wall of which part?....
MCQ->Consider the following statements pertaining to a pile group and a single pile at failure : 1. In loose and medium dense sands, the failure load per pile in a group will generally be greater than the failure load for a single pile. 2. In cohesive soils, the failure load per pile in a group will be greater than failure load for a single pile. 3. For piles driven in dense sands, the failure load per pile in a group is greater than the failure load for a single pile. 4. When the pile spacing is greater than 10 times the pile diameter, the failure loads per pile in a group and forly same in both sands and clays. Of these statements :....
MCQ->The maximum pressure which a soil can carry without shear failure, is called....
MCQ->If s is the shear strength, c and Φ are shear strength parameters, and σn is the normal stress at failure, then Coulomb's equation for shear strength of the soil can be represented by....
MCQ->260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air bubbles was 1415 g and the weight of pycnometer filled with water alone was 1275 g. The moisture content in the soil is....
MCQ->Consider the following statements relating to triaxial tests : 1. Change in length of the specimen in a triaxial shear test is required to be accounted for in the calculation of stresses at failure. 2. In 'Drained Triaxial Shear Test', drainage is permitted under a specified all-round pressure until consolidation is complete. The principal stress difference is then applied with no drainage being permitted. 3. Unconfined compression test is a special case of triaxial shear test. Of these statements :....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution