Question Set

1. In a simply supported wooden beam under uniformly distributed load, a hole has to be made in the breadthwise direction at mid-span to provide a pipeline. From structural strength point of view, it would be advisable to have the hole made at





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->A circular disc of copper has a symmetrical hole at its center. The disc is uniformly heated. The diameter of the hole will?....
QA->Prime Minister Narendra Modi recently inaugurated South Asia’s first cross-border oil pipeline. The pipeline will connect India with which nation?....
QA->Rahim travelled straight from point E to F at a distance of 5 km. From F he turned left and travelled 6 km and reached point G, there he took a left turn and travelled 5 km to reach point H. He took another left turn and travelled 2 km and reached point I. How far is he from the starting point ?....
QA->A man is facing South. He turns 1350 in the anti clockwise direction and then 1800 in the clockwise direction. Which direction is he facing?....
QA->‘I have been touring different parts of the world. During these travels, I have had the good fortune to come into contact with several saints and maharshis. But I have frankly to admit that I have never come across one who is spiritually greater than Swami Sree Narayana Guru of Kerala” Whose words are these?....
MCQ->In a simply supported wooden beam under uniformly distributed load, a hole has to be made in the breadthwise direction at mid-span to provide a pipeline. From structural strength point of view, it would be advisable to have the hole made at....
MCQ->A fixed beam and a simply supported beam having same span and develop same maximum bending moment due to uniformly distributed load on entire span. What is the ratio of uniformly distributed load on fixed beam to that on simply supported beam ?....
MCQ->A simply supported beam of span L carries a concentrated load W at its mid-span. If the width 'b' of the beam is constant throughout the span, then, when the permissible bending stress is 'f', the beam's mid-span depth will be....
MCQ->In which direction point 'A is located with respect to point 'B'? I. A man starts walking from point 'A' towards east and after walking 3 metres reaches point 'N', he turns right and walks 7 metres to reach point 'M'. Then he turns right and walks 6 metres to reach point '0'. He again turns right and walks 7 metres to reach point 'P'. He. then, turns left and walks 2 metres to reach point 'B'. II. A man starts walking from point 'A' towards east and after walking 3 metres reaches point 'N'. From point 'N' he walks 7 metres towards south and reaches point 'M'. From point 'M' he walks 6 metres towards west and reaches Point '0'. From point '0' he walks 7 metres towards north and reaches point P. From point 'P' he walks towards west and reaches point 'B'. The distance between points A and B is 8 metres.....
MCQ->How far is point M from point S I.Point S is 7m to the south of point M. Point T is 4m to the east of point S. Point P is 4m to the north of point T. Point Q is to the west of point P. II.Point R is 4m to the west of point Q. Point S is 4m to the north of point Q. Point X is 4m to the north of point R. Point M is 11 m to the east of point X.....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution