1. The electric field in a TWT due to applied signal





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

  • By: guest on 02 Jun 2017 01.05 am
    In a klystron the resonant structure limits the bandwidth. A TWT is a broadband device. Its main components are electron gun (to produce the electron beam) and a structure supporting the slow electromagnetic wave. The velocity of wave propagation along the helix structure is less than velocity of light. The beam and wave travel along the structure at the same speed. Thus interaction occurs between beam and wave and the beam delivers energy to the RF wave. Therefore the signal gets strengthened and amplified output is delivered at the other end of tube. The main features of TWT are : 1. Frequency range - 0.5 GHz to 90 GHz 2. Power output - 5 mW at low frequencies(less than 20 GHz) 250 kW (continuous wave) at 3 GHz 10 MW (pulsed) at 3 GHz 3. Efficiency - about 5 to 20% 4. Noise - about 5 dB for low power TWT 25 dB for high power TWT TWT is used as RF amplifier in broadband microwave receivers, repeater amplifier in broad band communication systems, communication satellites etc.
Show Similar Question And Answers
QA->The piece of hardware that converts your computer’s digital signal to an analog signal that can travel over telephone lines is called a–....
QA->The radiation which is not affected by the magnetic field or electric field is?....
QA->The capacity of an electric field to do work on an electric charge?....
QA->The length and breadth of a rectangular field in the ratio of 12: 7 . Find the length if area of the field is 52,500 Sq.m?....
QA->Which rays will deflect in electric field?....
MCQ->Consider the following statements: The klystron and travelling wave tube differ from each other, In TWT the microwave circuit is non- resonant.In klystron the microwave circuit is resonant.TWT uses attenuator.The wave is TWT is a non-propagating wave. Which of the above statements are correct?....
MCQ->The electric field in a TWT due to applied signal....
MCQ->The speed at which axial electric field due to signal advances in a TWT is equal to....
MCQ->Assertion (A): In the interaction region of magnetron an electron is subjected to three forces: force due to electric field, force due to magnetic field and centrifugal force.Reason (R): The mechanism of generation of microwaves, in a magnetron, involves interaction of electromagnetic fields with electrons moving in static electric and magnetic fields oriented at right angles to each other.

....
MCQ->Assertion (A): TWT uses a focussing mechanism to prevent the electron beam from spreading.Reason (R): In a TWT the electron beam has to travel a much longer distance than in klystron.

....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution