Multi Option Question Page 2805

<<= Back Next =>>

You Are On Multi Choice Question Bank SET 2805

140251. Smithy shope is the place where metals are:

140252. A ferrous metal is one which:

140253. Tongs is a tool for:

140254. Mild steel belongs to the category of:

140255. Anvil is used in:

140256. Mild steel has got the following metallic structure:

140257. Hammer is a:

140258. An Important product manufactured by the rolling process is:

140259. In smithy metals are heated up to:

140260. In malleable iron,the carbon is present in the ----------form.

140261. Upsetting is the process of increasing the:

140262. Pritchel hole of the anvil is used to:

140263. The main purpose of heat treatment is to change the:

140264. The beak or horn of the anvil is used for:

140265. An Important process used in case hardening steel is:

140266. A forge shop tool which is used for many operations like squaring,sizing,heading,bending and forming operations:

140267. ---------------can be hardened only by Carburizing or Cyaniding

140268. The shape of the hardie hole in an anvil is:

140269. High alloy steels must be heated slowly and uniformly for hardening,to avoid:

140270. The chisel used to cutting metals in normal temperature:

140271. The element in steel which directly affects the critical temperature of the steel to be heat treated is:

140272. For hot chiseling steel must be heated to a colour of:

140273. The heat-treatment process used to soften hard alloy and tool steel before machining is called:

140274. The cutting edge angle of a hot chisel is:

140275. Carbon steels are generally classified as:

140276. The cutting edge of a hot chisel is slightly ------------for better cutting action.

140277. The cutting edge angle of a cold chisel is:

140278. Swages consist of --------------------parts

140279. Machines which work on forgings by pressure is called----------

140280. A punch is used for making--------------in metal part when it is at forging heat.

140281. Machines which work on forgings by blow are called-----------

140282. Fullers are used for-------

140283. Forge chamfer on bolt head by a:

140284. Scarfingis the method of shaping the ends of rods for:

140285. Forging operation----------the structure of metal.

140286. Upset Forging is the operation of making:

140287. When large quantities of identical forgings are required in mass production:

140288. The temperature of furnace used for heat-treating steel is measured and controlled by an instrument called:

140289. IF steel is galvanized,it is coated with:

140290. For holding work of rectangular section----is used

140291. The peen of a straight peen hammeris-----------------to its handle.

140292. Of the following types of pipes of the same diameter,the one that is least corrosion resistant is:

140293. The peen of a cross peen hammer is ---------to its handle.

140294. Large amounts of Silicon when added to steel will increase the ----------properties of the steel.

140295. The alloy steel used for Hot working having a relatively:

140296. The steel for drop forging is heated to a:

140297. The hardened parts must be -------to relieve the hardening strains and to increase the toughness of the parts.

140298. To anneal hard steel,the steel must be heated above its critical temperature and then:

140299. The ability to heat metal most rapidly in:

140300. For nitriding steel components,the following atmosphere is generally used in the furncace:

<<= Back Next =>> Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions Question ANSWER With Solution

140251. Smithy shope is the place where metals are: (adsbygoogle = window.adsbygoogle || []).push({});