<<= Back Next =>>
You Are On Multi Choice Question Bank SET 1593

79651. Direct shell production casting is used in directly creating molds for metal casting.

79652. Solid ground curing systems are the most common rapid prototyping systems.

79653. In the design process for a product, it is not necessary that the designer know the functions and performance expected of that product.

79654. Manufacturing generally does not add value.

79655. Recycling or proper disposal of a product has become increasingly important to the design process.

79656. Tests of prototypes should simulate the conditions under which the product is to be used.

79657. Using computer-aided engineering, designs can be optimized and modified.

79658. Manufacturing involves making products from raw materials.

79659. Design for assembly is not an important part of manufacturing because assembly operations contribute little to product cost.

79660. Concurrent engineering involves all disciplines in the early design stages.

79661. Selective laser sintering apparatus uses laser-hardened resins to form models.

79662. Rapid prototyping costs about the same, but takes less time than traditional prototyping.

79663. Topographic shell fabrication is typically used to mold rapid prototypes of small-scale parts.

79664. This allows the designer to conceptualize objects more easily without having to make costly illustrations, models, or prototypes:

79665. This allows the performance of structures to be analyzed and tested efficiently, accurately, and quickly:

79666. This type of rapid prototyping system uses a laser to fuse powdered metals, plastics, or ceramics:

79667. This process recognizes the inherent interrelationships between design and manufacturing:

79668. Manufacturing may produce these types of products:

79669. The text used on a typical detail sheet should be ________.

79670. In an exploded assembly drawing it is customary for the drafter to use a ________ line to illustrate how parts fit together.

79671. It is customary for the first sheet of a working drawing set to include ________.

79672. In order to create an accurate assembly drawing the drafter should create the ________ drawings first.

79673. The thread note for a typical bolt will include the ________.

79674. A detail drawing of a part is intended to provide the necessary information needed to fabricate that part.

79675. Mechanical designers can expect to make several revisions to a design before it is finalized.

79676. Problem identification has to do with the final stages in the mechanical design process.

79677. The mechanical engineering industry relies on complex mechanical drawings that are often referred to as working drawings.

79678. Drafters are often expected to follow the drafting standards as set in the ASME Y14.5M-1994 publication.

79679. Mechanical drafters can revise any drawing at any time without tracking those changes.

79680. Drafters do not need to worry about the number of decimal places used on dimensioning a technical drawing.

79681. An assembly drawing is intended to illustrate a single mechanical part.

79682. Designers utilize several methods for solving mechanical design problems including brainstorming ideas.

79683. To develop creative thinking the best method of teaching is

79684. BOM stands for Bill of Materials.

79685. International Red Cross Society is founded by

79686. The typical parts list should include the ________.

79687. The student studies first hand objects and materials in their natural environment is known as:

79688. A typical set of mechanical working drawings includes ________.

79689. ICDS programme started in

79690. The title block used on working drawings should include the ________.

79691. The optimum period of storage of river water considered to be about

79692. One critical issue drafters need to pay close attention to is the ________.

79693. PEP Should be initiated before

79694. In the mechanical design process the first step is to ________.

79695. MTP Act came into force in the year of:

79696. In multi-view drawing it is common practice to include three views, the front, the top and the right side. If no dimensions are required on the right side view the drafter can ________.

79697. The albumin of the egg begins to coagulate at

79698. The AutoCAD command used to combine two or more primitive shapes into a single complex 3-dimensional model is ________.

79699. Prevention of food adulteration Act was enacted in

79700. Most architectural drawings produced for field use by building contractors are printed on architectural "D" size paper which measures ________.

<<= Back Next =>>
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions